Showing posts with label cal spa hot tubs. Show all posts
Showing posts with label cal spa hot tubs. Show all posts

Wednesday, May 7, 2014

Can I use a INTEX SALTWATER SYSTEM for my 500 gallon Cal Spa Hot Tub?




MiHa





Answer
Nope. Salt water generators are in fact chlorine generators. They take salt dissolved in water and convert it to another form of salt...chlorine. It's just at a lower dose than traditional chlorine sanitizing systems and as such is easier on peoples eyes and skin.
There's a reason that hot tubs use sanitizers other than chlorine and that's because in a hot water environment like a spa, that's also bubbling, chlorine oxidizes an organic and gases off, directly into your face and eyes. Pretty darn uncomfortable for your eyeballs.
Stick to the bromine or ozone that you're using now.

I have a new hot tub model E748L from cal spa it runs 220v. I am wonder is the electric going to cost a lot?




Mai





Answer
How many watts? If you look on various appliances, such as a coffee maker, you will see a rating in watts. My LCD TV says 65 watts for example. I pay for my electricity by the kilowatt-hour. 1 kilowatt-hour is the power used by a 100 watt light bulb that is ON for 10 hours. 100 watts * 10 hours = 1000 watt-hours, = 1 kilowatt-hour. I pay 10.8 cents per kilowatt-hour, so running a 100 watt light for 10 hours would cost me 10.8 cents. At 65 watts, My LCD TV would use a kilowatt-hour in 1000 watt-hours/65 watts = 15.38 hours. So, running my LCD TV for 15.38 hours uses 10.8 cents worth of electricity. Which comes does to 0.7 cents per hour. So, find out how many watts the hot tub draws and do the math, the same as I did for my LCD TV... Look at your last utility ill to get the rate you are charged for electricity. Your hot tub probably has 2 ratings, one for the pump motor and a second for the heater. Remember, the heater is not on all of the time since it is controlled by a thermostat. So, what you need to do is figure out how long the motor runs and the heater runs and using the rate from you utility bill, you can calculate watt-hours used...




Powered by Yahoo! Answers

Sunday, January 5, 2014

Why does my hot tub keep blowing the breaker?

cal spa hot tubs
 on Cal Spa 5.5 kW/240 Volt XL Heat Exchanger Replacement F2550-0011 ...
cal spa hot tubs image



Seabass


My hot tub blows the breaker at the disconnect after exactly 60 seconds. it still heats and both pumps are operational. furthermore, if I turn the jets on the tub stays on as long as the jets stay on. it is a 1998 cal spas tub, and has been working fine for two months and now is doing this. there is a possibility that something could have gotten wet as well. It is strange because the tub will actually throw codes if something is wrong, but It doesn't throw any currently, it just flips the breaker.
Ideas?
Thanks!



Answer
The breaker is being overloaded or it is a bad breaker. How many amps are you pulling off that breaker. You should have a breaker that carries a load equal to or a few amps higher than the maximum load that your spa needs. Make sure your filters are clean. Dirty filters will cause the pumps to draw more amps.

I have answered your electrical problem with the breaker tripping. You will have to determine if the breaker is bad or being overloaded. replace the breaker with the same amp breaker because the breaker protects your wiring. If the spa Tripp's the new breaker the problem would be the amps being pulled on that circuit. the spa should be the only thing on that circuit. Is your spa on a 110 or 220 circuit? what size is your breaker?

The link below may help you trouble shoot.

How do I turn down my 2003 Cal Spa Pneumatic Series hot tub?

Q. I just moved into a house with a Spa from Cal Spas. The owners manual says it's for Pneumatic electronic series 1100, 2300, 5000, 7000, and 9000. I'm not sure which one mine is but I can't find anything on how to set my default temp on it. I've tried putting it in different modes and pressing the temp down button but it won't go below 80 degrees. Any ideas?


Answer
Typical operating temperature for a hot tub is 102- 104 degrees F

It is not designed to go down below 80 degrees F if you want it lower than that, shut it off.




Powered by Yahoo! Answers